LUXON

LUXON NEXUS M10 INTERFACE BAR MOUNTS KTM / HUSQVARNA / GASGAS / BETA / SHERCO

Name: LUXON NEXUS M10 INTERFACE BAR MOUNTS KTM / HUSQVARNA / GASGAS / BETA / SHERCO
Brand: LUXON
SKU: LUX-KTM-SS-A0055
Price: 599.95 AUD
Availability: InStock

NEW

SKU:LUX-KTM-SS-A0055

$599.95 AUD

SALE Sold out

Tax included. Shipping calculated at checkout.

BAR SIZE 1 1/8"

Product variants

Quantity

DESCRIPTION

Nexus is the ultimate, comfort oriented, high-performance bar mount. These mounts fully isolate the handlebar from the triple clamp with highly developed elastomer sets, absorbing roughness and vibration from the track or trail, without a loss of steering precision, and eliminating twisting in small crashes and tip-overs.

This mount is a must for off-road and enduro, but also works great for motocross, vet riders, and riders with hand and wrist injuries. The unique, patent pending design, is much lighter, more versatile, simpler, and less expensive than competing products. Three bushing sets (soft, medium, and firm) are included to tune the feel.

Kit Includes:

Rubber bushings
Bar clamps
Bases
Caps
High-strength steel mount and pinch bolts
Anti-seize
Instruction manual.

Luxon patent pending Nexus bar mounts are 25% lighter and nearly 20% less expensive than the comparable XC Gear Mako360 bar mount, but have increased steering precision and mounting versatility. When compared to a Flexx handlebar setup, the Nexus bar mounts save nearly two pounds (832 g) at 11% lower cost (solid bar mounts with Flexx bars vs. Nexus bar mounts with Pro Taper Evo bars).

Three different hardness levels of bushings are included at no additional cost. Bushing hardness is a compromise between comfort (soft) and steering precision (firm). Like all rubber bushings, these are wear items and will eventually break down and need replacing. Softer bushings will need to be replaced more often than harder bushings and are more susceptible to crash damage. Replacement bushings are available here.

BAR SIZE:

The Nexus bar mounts fit standard 1 1/8" handlebars only (the most common size). Sorry, Luxon do not offer the Nexus bar mounts in the FB36 (36 mm) size or the older 7/8" bar size.

BAR POSITION:

Nexus mounts are the stock KTM motocross height of 25mm (bottom of bar to top of triple clamp) and offset (7mm of bar position change when flipping the mounts around).

SPECIFICATIONS

WEIGHT 531 g, 1.17 lbs
STOCK WEIGHT (KTM/GASGAS) 256 g, 0.56 lbs
STOCK WEIGHT (2024 BETA) 252 g, 0.56 lbs
XTRIG PHDS WEIGHT 492 g, 1.08 lbs

BIKE FITMENT

Luxon mounts fit most bikes without issue, but in some cases, you may need to trim plastic brackets or relocate hour meters or accessories to allow clearance in the extreme mounting positions. Always check for full clearance after installation and before riding.

For Supermoto, Adventure, and Street bikes, the mounts may interfere with the gas tank at full steering lock for the furthest back bar position (close mount hole, bars back toward the rider). Always check for full clearance after installation and before riding.

Most standard bar pads will fit with some trimming around the bar mount area. A Dremel tool with a sanding drum makes this easy, but a razor blade can be used as well.

BETA

GASGAS

HUSQVARNA

KTM

SHERCO

The M10 interface is a raised block on the top triple clamp, 20mm wide, with multiple (two or three) 10mm threaded holes per side. The bar mounts sit on these blocks and bolt directly to the triple clamp with an M10 bolt. These mounts fit many KTM, Husqvarna, GasGas, Sherco, Kove, and Beta Motocross, Off-Road, Enduro, Freeride, Adventure, Supermoto, and Street bikes that use the M10 interface. They do NOT fit the triple clamps with rubber cones in them or with unthreaded holes. If in doubt, contact us!

Image Above: The M10 interface on a stock KTM triple clamp.

INSTALLATION INSTRUCTIONS

VIEW INSTALLATION INSTRUCTIONS HERE

SPECIAL ORDERS

In order for us to be able to offer the entire range of some products, we have a special order in process. Once you place your order, we will order your items in from our suppliers. This allows you to have more freedom in choice of colour, style, upgrades etc.

Processing time can vary - some items we will have within a few days, whereas some items are ordered in from the United States of America or Europe, and therefore require an extra few weeks to account for shipping time and in some cases, manufacturing time. You will receive an email confirmation when your order has been placed and you will receive status updates on your order as it progresses.

If you have any questions or concerns or would like a rough ETA on order delivery times or stock levels, please get in touch with our customer service team and they will be able to assist you: support@motohouse.com.au or (07) 5681 1505.

ITEMS FROM USA

We place stock orders from the USA every week - this includes items from Luxon. We try our best to ensure all items are in stock but if not - please allow an extra 1-2 weeks for your order to be processed.

SHIPPING & RETURNS

SHIPPING

We offer free standard shipping on all items (excluding bulky items) over $20 within Australia and over $50 to New Zealand. All other internaitonal destinations will be invoiced separately. View our shipping policy here.