LUXON GEN3 PRO TRIPLE CLAMPS DUCATI DESMO450 MX 2026

The Gen3 Pro clamps are the pinnacle of triple clamp technology and designed for the most demanding riders. Lighter and stronger than stock, they feature adjustable offset and adjustable stiffness to fine tune your ride. Bores are finish machined from the 7075-T6 aluminium after anodise ensuring precise alignment and eliminating slippage.

Stiffness parameters have been optimised for precision without sacrificing comfort. These clamps feature a split lower to improve suspension plushness. Optional braces are included that tie the lower split together to fine tune stiffness for faster riders who prefer a more precise handling character at the sacrifice of some comfort.

These clamps also use a (removable) solid number plate mount to eliminate the floppy plastic bracket.

Features adjustable offset in 21, 22, 23, and 24 mm. Choose from red or black anodise colours. 

Also available in custom anodised colours such as: Purple, Pink, Club MX Blue (Turquoise), Bronze, Gold and Clear (Raw Aluminium Look). This will incur an additional lot charge price which covers both electropolish and anodise. Lead time is heavily dependent on Luxon current manufacturing schedules. 

INCLUDED IN KIT:

• Upper and lower clamps
• Two steering stems
• Two OEM lower bearings/races/seals installed
• Two offset inserts
• Braces for flex adjustment
• An aluminium number plate mount
• Titanium pinch bolts
• Anti-seize.

BAR MOUNTS NOT INCLUDED - SEE INFORMATION BELOW

NUMBER PLATE MOUNT

The clamps fit the stock number plate bracket, but also include an aluminium number plate mount to fix the floppy attachment of plastic bracket. When using the optional aluminium mount (recommended), the stock number plate mount must be cut for clearance, but this is easily accomplished with a dremel tool or razor blade similar to the image below.

LUXON WEIGHT 1,855 g, 4.09 lbs
STOCK WEIGHT (2026 DESMO450 MX) 1,910 g, 4.21 lbs

You will require bar mounts for these triple clamps as OEM mounts will not fit. All Luxon Gen 3 triple clamps use the M12 mounting interface: M12 bolts threaded directly into the top triple clamp with a 26mm wide groove to locate the bar mount. The mounts are spaced 90mm apart. Gen3 clamps are compatible with Luxon M12 bar mounts as well as any bar mounts compatible with Xtrig M12 clamps.

Luxon recommend using their Gen3 4-Post Bar Mount available here, but for those who prefer a solid mount - Luxon recommend their solid bar mounts available here.

Luxon bar mounts drop the bar height on by 7mm (vs. the 2026 Desmo 450) for a much better rider position. Bar riser kits are available for those who prefer a taller bar position.

• Luxon recommend the Precision Parabolic Damper as it is lightweight, low-profile, and very effective. It's a direct bolt-on with Luxon 4-post or solid bar mount options.
• For Scotts damper users, Luxon have an above the bars top mount available here. This fits both their 4-post and solid bar mount options.
• Any bar mount/steering damper setup that fits the M12 (Xtrig) interface will fit Luxon Gen3 clamps.
• The HPSD (Honda damper) and similar WP damper mount kits are compatible with Luxon Gen3 clamps.

DUCATI

• DESMO250 MX 2027
• DESMO450 EDX 2026
• DESMO450 MX 2026

VIEW INSTALLATION INSTRUCTIONS HERE