LUXON
LUXON 4-POST RUBBER ISOLATED M12 STARK VARG BAR MOUNTS (FOR LUXON GEN3 TRIPLE CLAMPS & XTRIG CLAMPS)
LUXON 4-POST RUBBER ISOLATED M12 STARK VARG BAR MOUNTS (FOR LUXON GEN3 TRIPLE CLAMPS & XTRIG CLAMPS)
SKU:LUX-SRK-SS-A0002-118
Couldn't load pickup availability
- DESCRIPTION
- SPECIFICATIONS
- BIKE FITMENT
- INSTALLATION INSTRUCTIONS
- SPECIAL ORDERS
- SHIPPING & RETURNS
Luxon lightweight 4-post bar mounts eliminate twisting due to small crashes and tip-overs without sacrificing vibration absorption like a solid mount would. Four sets of bushings absorb hard hits and track roughness without compromising steering precision. Three different rubber bushing sets (soft, medium, and firm) are included to fine tune the feel.
Luxon Stark mounts are compatible (and require) the stock phone holder. The mounts are the stock height of 25mm (bottom of bar to top of triple clamp) and stock offset (7mm of bar position change when flipping the mounts around).
The M12 version of Luxon Stark mounts fits Luxon and Xtrig aftermarket clamps with the M12 interface. These mounts are compatible (and require) the stock phone holder. The mounts are 4mm lower than the stock height (bottom of bar to top of triple clamp). Offset is 7.5mm (7.5mm of bar position change when flipping the mounts around).
Kit Includes:
- Rubber isolated lower bar mounts
- Rubber bushings
- High-strength steel mount bolts
- Anti-seize
- Instruction manual
(Re-use your stock top clamp/phone mount and bolts).
Three different hardness levels of rubber bushings are included at no additional cost. Soft (green) is for lighter riders, vet riders, or those with wrist injuries. Medium (yellow) is recommended for most off-road and motocross use, and hard (red) is recommended for aggressive motocross use and faster riders.
Bushings will "break in" on the first ride and become a little softer than when first installed. Like all rubber bushings, these are wear items and will eventually break down and need replacing. Softer bushings will need to be replaced more often than harder bushings. Replacement bushings are available here.
Luxon 1 1/8" bar mounts fit standard 1 1/8" (28.6 mm) handlebars (sometimes called fatbars). Luxon do not offer bar mounts to fit the old 7/8" size handlebars. Other aftermarket companies offer adapter bushings to fit the 7/8" bar diameter in standard 1 1/8" mounts if necessary.
FITMENT:
These mounts fit Luxon Gen3, Gen3 Pro, and many Xtrig triple clamps. They do NOT fit stock clamps or other aftermarket clamps. Luxon mounts fit most bikes without issue. In some cases, you may need to trim plastic brackets or relocate hour meters or accessories to allow clearance in the extreme mounting positions (for example: front hole, bars away from the rider). Always check for full clearance after installation and before riding.
(Image: The M12 interface on a Luxon Gen3 triple clamp)The M12 interface is a recessed slot on the top triple clamp, 26mm wide, with three 12mm threaded holes per side. The bar mounts sit in these slots and bolt directly to the triple clamp with an M12 bolt.
WEIGHT (excluding top mount and pinch bolts) 271 g, 0.60 lbs
STOCK WEIGHT (excluding top mount and pinch bolts) 235 g, 0.52 lbs
STARK
- VARG 2023-2026 (both Motocross and Enduro models)
These bar mounts fit the Stark Varg and are required to use the stock phone mount (top bar clamp) and pinch bolts.
SPECIAL ORDERS
In order for us to be able to offer the entire range of some products, we have a special order in process. Once you place your order, we will order your items in from our suppliers. This allows you to have more freedom in choice of colour, style, upgrades etc.
Processing time can vary - some items we will have within a few days, whereas some items are ordered in from the United States of America or Europe, and therefore require an extra few weeks to account for shipping time and in some cases, manufacturing time. You will receive an email confirmation when your order has been placed and you will receive status updates on your order as it progresses.
If you have any questions or concerns or would like a rough ETA on order delivery times or stock levels, please get in touch with our customer service team and they will be able to assist you: support@motohouse.com.au or (07) 5681 1505.
ITEMS FROM USA
We place stock orders from the USA every week - this includes items from Luxon. We try our best to ensure all items are in stock but if not - please allow an extra 1-2 weeks for your order to be processed.
SHIPPING
We offer free standard shipping on all items (excluding bulky items) over $20 within Australia and over $50 to New Zealand. All other internaitonal destinations will be invoiced separately. View our shipping policy here.
RETURNS
If you are unhappy with any items you have purchased, we have a 30 days returns policy - please view here.
